← Toolkit

Media and stock calculator

Check every result against your SOP and your own balance records before preparing a batch.

1. How much stock to add

V1 = (C2 × V2) ÷ C1. Example: a 1 mg/ml BAP stock, 2 mg/L wanted, 1 litre of medium gives 2 ml.

Add 2.00 ml of stock to make 1 L at 2 mg/L.

2. mg/L and µM

1.00 mg/L = 4.44 µM

3. Bleach dilution (available chlorine)

Check the label of your bleach. Household bleach is often 4 to 5% available chlorine, some industrial products 10 to 12%. Make it fresh.

Mix 20.0 ml bleach with 80.0 ml sterile water.

4. MS medium weight sheet

Weights of each salt for the batch (mg). For routine work, weigh these into concentrated stocks (course lesson 3.4) rather than one by one. Keep calcium and iron apart in stocks.

GroupComponentmg/L (full MS)mg for this batch
MacroNH₄NO₃16501650
MacroKNO₃19001900
MacroCaCl₂·2H₂O440440
MacroMgSO₄·7H₂O370370
MacroKH₂PO₄170170
MicroH₃BO₃6.26.20
MicroMnSO₄·4H₂O22.322.3
MicroZnSO₄·7H₂O8.68.60
MicroKI0.830.830
MicroNa₂MoO₄·2H₂O0.250.250
MicroCuSO₄·5H₂O0.0250.025
MicroCoCl₂·6H₂O0.0250.025
IronFeSO₄·7H₂O27.827.8
IronNa₂EDTA·2H₂O37.337.3
Vitaminmyo-Inositol100100
VitaminNicotinic acid0.50.500
VitaminPyridoxine HCl0.50.500
VitaminThiamine HCl0.10.100
VitaminGlycine22.00
CarbonSucrose30 g/L30.0 g
GellingAgar7 g/L7.00 g

Then adjust pH to 5.6 to 5.8 before adding agar and autoclaving. Vitamins and salts follow strength; sucrose and agar do not change with strength unless you set them.